Menu
The DAB-4s is a professional DAB EDI/ETI satellite receiver and converter for up to 4 DAB multiplexes.
It is used at remote transmitter sites to demodulate up to 4 EDI/ETI data streams from a DVB-S/S2 satellite feed and output to the transmitter.
Moreover, it can flexibly be configured as a 4 x EDI/ETI converter, a 4 x ETI/EDI converter or as a 4 x EDI Level converter. Additionally, it monitors all EDI/ETI streams. A pair of of input ETI/EDI sources can work together in a redundant master / slave configuration.
Flexible in application: The DAB-4s allows to receive EDI streams or ETI signals from different sources (Satellite, IP and E1 lines) simultaneously converts the signals to the DAB transmitters in the field.
As a high-density solution, the device offers four ETI outputs and four ETI bidirectional interfaces (in/out) to increase the number of ETI outputs if e.g. ETI mirroring is needed. Moreover, it is equipped with two Ethernet data interfaces – in and out. For synchronisation of all sites, the DAB-4s can use NTP, PTPv2 or an external 10 MHz signal.
Reliable and robust: Made for 24/7 operation, the DAB-4s can be equipped with redundant power supplies. Two alternative EDI or ETI sources can be combined in a main/backup configuration for redundancy purposes.
In case the external clock fails, the DAB-4s can use an internal clock recovery from the EDI stream by jitter removal and assure an ongoing synchronised transmission.
Smart management: The DAB-4s is fully configurable via web interface or remotely via SNMP trap (get & set). In addition, the device offers real time statistics and monitoring of the main DAB+ parameters and on air monitoring at transmitter sites is possible by an optional DAB tuner module.
Datasheet for DAB-4s Codec (PDF, 0,5MB)
monday – friday, 9-17
